SolaMaster Product Selection Guide

Integrated LED Light Kit

Allows integration of electrical light for a cleaner ceiling appearance and nighttime illumination, from a single fixture.

• All-in-one ceiling fixture
• Dimmable LED
• CRI:  80
• 0-10v Controller options
• High efficiency LED: Lumens/Watt > 100
• LED rated @ 50,000 hours
• 10,000 Lumens (330DS & 750DS)
• 3,250 Lumens (300 DS)
• 4,000K Temperature

- Available: 300DS, 330DS and 750DS

Thermal Insulation Panel

Provides unmatched thermal performance. Two climate control discs paired with polycarbonate ring prevent conductive and convective heat transfer. Spectralight® Infinity material inside ring maximizes light transfer.

• 330 DS
• 750 DS

0-10v Daylight Dimmer

0-10V Daylight Dimmer

At times it may be necessary to reduce the amount of daylight in a building. The optional 0-10V Daylight Dimmer uses a patented butterfly Design to adjust daylight illumination levels. The 0-10V Daylight Dimmer does not come with a controller.

Lutron® DVTV 0-10V Controller

Individual or multiple Daylight Dimmers can be controlled using 3rd party 0-10V controllers. These can be simple or very complex, depending on the application. Solatube provides a simple option for most applications, the Lutron® DVTV 0-10V Controller. This controller can be ordered in addition to the 0-10V Daylight Dimmer, or a 3rd party controller can be sourced.

Spectralight® Infinity Extension Tubes

Extension tubes can be added in increments of 24 in. (610 mm) or 48 in. (1220 mm) for long runs without sacrificing performance. Spectralight Infinity has the highest reflectivity in the world for the brightest, purest light. Create tube runs of up to 50 ft. (15 m).

• 300 DS
• 330 DS
• 750 DS

Spectralight® Infinity 0-90 Degree Extension Tube

Provides superior performance that flexible tubes can’t match. An innovative design with three built-in 30 degree angle adapters that give you the flexibility to install around obstacles. Available in 23 in. (580 mm) length.

• 300 DS
• 330 DS
• 750 DS

Turret Extensions

Use to raise the height of the Solatube dome on a roof to avoid snow, water, or shading from roof obstructions. Order additional Spectralight® Infinity tubing to accommodate turret height. Available in 12 in. (300 mm), 24 in. (610 mm), 36 in. (900 mm) and 48 in. (1220 mm) sizes.

• 300 DS
• 330 DS
• 750 DS

Transition Box

The SolaMaster® Series features a patented transition box that seamlessly converts the round tubing to a square diffuser. The transition box easily fits into standard commercial ceiling grids. Available in metal or polymeric material.

• 330 DS
• 750 DS

Flashing Insulator

This insulating material helps to reduce condensation in cold climates when the flashing is exposed to a humid interior space. The insulator is affixed to the flashing base and the top tube slips through the opening, which provides a seal between the interior and metal flashing.

• 300 DS
• 330 DS
• 750 DS

Trim Ring

For use with the Solatube 330 DS and 750 DS Open Ceiling Configurations, the trim ring provides a finished appearance to the installation.

• 330 DS
• 750 DS

Secondary Diffuser

To eliminate unwanted glare or to reduce light output, an optional secondary diffuser can be inserted into the Solatube Daylighting System dome for natural lighting preference.

• 330 DS
• 750 DS

Security Bar

This stainless steel bar inserts into the flashing turret across the diameter of the opening. The bar is fastened using rivets and prohibits entry through the dome.

• 330 DS
• 750 DS

Dome Security Kit

The kit consists of three rivets with protective nylon spacers, which replace dome screws. The dome security kit reduces the possibility of the dome being removed.

• 330 DS
• 750 DS

Wire Suspension Kit

Use the Wire Suspension Kit when additional bracing to the structure is required.

• 330 DS
• 750 DS

Dome Edge Protection Band

Made of galvanized steel, this optional component is designed for use on Class A, B, or C roofs to maintain fire rating.

• 330 DS
• 750 DS

Curb Cap Insulation Kit

This R6 rigid, 1 in. thermal insulation is sealed and taped in the curb cap flashing base, which provides a thermal seal between the metal flashing and building envelope.

• 300 DS
• 330 DS
• 750 DS